Views: 0 Author: Site Editor Publish Time: 2020-11-25 Origin: Site
As a new type of distribution wire, bus bar is more and more people choose bus as the distribution wire because of its high safety and good performance. Therefore, busbar machines are now becoming popular in the market. The busbar machine is a cost-effective and easy-to-operate machine that can produce high-quality and large numbers of busbars in a limited time. Here are some simple operation skills of the bus bar machine. Learning these skills will help you use the bus bar machine better.
1. Operating skills before starting the bus bar machine
2. Operating skills in bus bar machine work
3. Operating skills of the bus bar machine shutdown and daily maintenance
First of all, you need to read the manual of the bus bar machine and have a basic understanding of the structure and performance of the bus bar machine. If you are using the busbar machine for the first time, you must fill the oil tank with oil before starting the machine. This is to avoid damaging the oil pump. If the working environment temperature of the bus bar machine is lower than 0°C, the bus bar machine should be turned on and let the bus bar machine run dry for a few minutes before working, so that the bus bar machine can work better. Operators of the bus bar machine cannot wear scarves or coats to avoid accidents.
When the bus bar machine is working, there must be a special operator to direct the production. The operator must choose the gap between the punching blade and the die and the bending radius according to the thickness of the copper or aluminum row. Only in this way can you produce products that are satisfactory and meet your needs. When the busbar machine starts to operate, the operator cannot put his hand or part of his body between the upper and lower molds (blade) to avoid accidents. All sundries and tools are placed on the workbench, away from the machine. This is to prevent something from rolling into the mold or knife edge, hindering the work of the bus bar machine. When the operator is holding the workpiece and waiting for the slide to go down, please be careful. The electrical and hydraulic components of the bus bar machine must be flexible in action and in the correct position. If the operator finds an abnormal phenomenon, he must immediately stop the operation and check the bus bar machine. When the operator changes the mold, the bus bar machine must be suspended. Never change the mold while the bus bar machine is still working.
The bus bar machine must be shut down safely in this order. First, turn off the working buttons of each unit, then turn off the power switch on the operation panel, then turn off the main circuit air switch, and finally turn off the workshop power switch. In this way, closing the bus bar machine is safe and will not cause damage to the bus bar machine. The maintenance of the bus bar machine is also very simple. Electrical cabinets need to be cleaned regularly and kept clean. Air blowing or erasing methods can be used. You should check the sharpness of the blade and die cutting edge regularly. If the cutting edge is found to be dull, it should be sharpened or replaced in time. You need to pay attention to and ensure that the fixing screws of the connecting parts are locked at any time to prevent poor contact of the parts, which will cause the bus bar machine to malfunction. You need to check the bend of the cable to prevent the wire from breaking. In order to keep the oil of the bus bar machine clean and smooth, you need to lubricate its parts.
After reading this article, have you learned the simple operation skills of these busbar machines? I hope this article can help you during your use of the bus bar machine. We are a professional manufacturer, if you want to buy a bus bar machine，automatic busbar assembly line，automatic busbar inspection machine or other related products, please contact us. We are happy to provide you with quality products.
