bus plug stab finger for busway unit plug

- Kiande
- China
- 10 Days
- 10000 Per Month
bus plug stab finger for busway unit plug
with good electrical conductivity
Busbar Trunking System is the is a system of distributing electric power using copper or aluminium busbar with suitable enclosures and good amount of protection to prevent the cables from getting damaged due to foreign bodies. ... The system of cooling is much better than traditional cabling system.
Model | Current | Busbar Size | Type | Remark |
KDT-15-5 | 0~100A | 5、4mm | Compact busbar plug | T type |
KDT-18-5 | 100~200A | 5、4mm | Compact busbar plug | T type |
KDT-22-5 | 250~350A | 5、4mm | Compact busbar plug | T type |
KDT-30-5 | 400~630A | 5/4mm | Compact busbar plug | T type |
KDT-15-6 | 0~200A | 6mm | Compact busbar plug | T type |
KDT-18-6 | 250~350A | 6mm | Compact busbar plug | T type |
KDT-28-6 | 400~630A | 6mm | Compact busbar plug | T type |
Installation Guideline of Tap Off Unit (Plug-In Type)
There are two types of plug-in tap-off units :
The joint pack is a compression joint design which uses a specially designed Belleville washer to distribute the pressure evenly over the joint pack. Joint packs are used to connect all the components in a busbar system together. The earth is maintained through the joint by both the joint pack cover and the earth side plate. The joint pack is supplied in specific sizes depending on the rating of busbar required.
The connector has a large flow rate and 20% of the bus body, and the temperature rise is controlled by increasing the flow capacity.
Four-piece manganese steel bowl mat pressure equalization device ensures pressure equalization of all parts of the connector
Using the torque memory function stud bolt, when the bolt is forced to reach 70 Nm, the yellow sign will break, and the installation is quick and convenient.
The torque of 70 Nm can automatically adjust the thermal expansion and contraction of the connector.
Use the 19mm regular phone case to complete the installation.