Busbar Accessory
busbar accessories
-
Belleville Washers for busway joint pack
Quality Busbar Accessories manufacturers & exporter - buy Bowl washer used on busbar joints from China manufacturer.
Email Details -
High Loads Belleville Spring Washers
High Loads Belleville Spring Washers
Email Details
Usage: busbar joint pack incase the connect area
Material: Mn 65 -
Rivet for busbar enlcosure
A rivet is a mechanical fastener with a plane unthreaded shaft that's inserted through holes to join busbar enclosurer together.
Email Details
The rivet can be done manually .
The rivets is going to be installed the rivet is placed in a punched or drilled hole and the tail kind of upset so that it will expand to about 1.5 times the original shaft diameter.
The pounding and pulling will create a head on the other end and the tail end will be a flatter one. The final shape will be like a dumbbell-shaped. -
Copper Tob Contact Leg Tin for Busduct
Parameter of plug stab fingers for Busduct Plug in Tap Off Box
Email Details
Its widely used on the plug in tap box for electricity.
the plug stab fingers makes positive contact with the busway
ground (integral or internal) before the phase or neutral stabs contact
the bus bars -
Aluminum Joint support for Compact Busduct
Aluminum Joint support for Compact Busduct
Email Details
Width:125mm,128mm,130mm,
Phase: 4P/5P
Screw thread:M8
No need to drill holes on side plate. with high strength, stability and reliability -
Aluminum end Block for busbar trunking system
Aluminum end Block for busbar trunking system
Email Details
Width:125mm,128mm,130mm,
Phase: 4P/5P
Screw thread:M8
No need to drill holes on side plate. with high strength, stability and reliability -
Aluminum end Block for Compact Busduct
Aluminum Joint support for Compact Busduct
Email Details
Width:125mm,128mm,130mm,
Phase: 4P/5P
Screw thread:M8
No need to drill holes on side plate. with high strength, stability and reliability -
Rivet for busduct enclosure
A rivet is a mechanical fastener with a plane unthreaded shaft that's inserted through holes to join busbar enclosurer together.
Email Details
The rivet can be done manually .
The rivets is going to be installed the rivet is placed in a punched or drilled hole and the tail kind of upset so that it will expand to about 1.5 times the original shaft diameter.
The pounding and pulling will create a head on the other end and the tail end will be a flatter one. The final shape will be like a dumbbell-shaped. -
Socket for air Busduct Plug in Tap Off Cover Installation on Busway
Socket for air Busduct Plug in Tap Off Cover Installation on Busway offered by China manufacturer Kiande Electric.
Email Details
The bus plug has complete safety interlock mechanism to ensure electrical safety
Raw material: PA66
Phase: 4/ 5 phase
Phase:19,22